The
ultimate fabric for intense sun environments.
Thanks to its
unique construction process, Sunbrella provides protection and years of
service in intense sun areas like Arizona and other areas of the
Sunbelt, where UV rays will rapidly degrade the paint and
interior. Because of the use of acrylic fibers,
which are naturally UV resistant, Sunbrella has long been the
recognized leader in long-wearing marine fabrics for bimni tops, sail
covers and deck enclosures. Besides marine uses, Sunbrella is
also used for commercial awnings due to its ability to provide UV
blockage with a rich, woven finish. The acrylic fibers are
solution dyed before the fabric is woven to assure the color goes all
the way through the fabric. Using a special finish process,
the material is then softened for use as a car cover fabric.
The fabric is exceptionally strong and, coupled with its UV resistance,
it also makes an excellent cover for RV's and trailers that spend
extended time stored outside.
|
|
- Long Lasting
Strength - Acrylic fibers suffer minimal loss of strength from exposure
to heat, moisture and UV.
- Fade Resistant
- Colors are a result of pigments which are actually built into the
fibers (solution dyed), instead of just dying the finished fabric.
- Water Resistant
- Treated for moisture resistance (but remember, this material is
primarily for UV protection).
- Rot, Mildew
Resistant - Acrylic fibers resist growth that occurs in moist
environments.
|
Material colors
available - Pacific Blue, Sky Blue, Cadet Gray, Jet Black,
Toast, Burgundy
Custom
designed for your vehicle. Sunbrella fabric.
|
| Paint
protection -
Good. |
| Rain/Snow
protection - Good. |
| UV
protection -
Best. |
| Breathability
-
Best. |
| Limited
Warranty - 5 years. |
| Pricing
starting at: $395.00 |
|
 |
 A great value for
outdoor protection.
NOAH barrier
fabric actually stops water, yet it "breathes" to allow any trapped
moisture, seam seepage or condensation to easily evaporate.
The unique patented construction process results in a cover with
maximum all-weather protection...highly water resistant, dust
resistant, UV resistant and breathable to make sure moisture and/or
heat don't stay under the cover. Made in the U.S. by
Kimberly-Clark, the fabric weighs only 4.45 oz./sq. yd., so it's easy
to handle and fold.
|
Protective
Outer Layers - A
bi-component spunbond, using sheath-core technology. The
inner core is polypropylene for strength, with a polyethylene wrap for
softness. A silver-gray color was selected because of its
heat-resistant properties. The fabric is also treated with UV
inhibitors for extended outdoor use.
|
|
Micro-Porous
Middle Layer - The barrier
layer is breathable film, a proprietary stretch-film technology
developed exclusively for Kimberly-Clark. The film is
stretched and subjected to a chemical process that creates microscopic
holes smaller than droplets of water or dust, yet large enough to allow
moisture vapor to escape.
|
|
Soft,
Paint-Protecting Inner Layer - A
bi-component fabric made with polyethylene and nylon. This
combination results in an exceptionally high strength-to-weight ratio,
with the "soft touch" necessary for today's water-based paint finishes.
|
Material
color available - Silver-Gray
Pricing starting at: $198.00
- Maximum Protection Indoors & Out!
The best
high-performance fabric we've ever offered - a Covercraft exclusive.
WeatherShield?
uses the patented Nextec? encapsulation process, originally developed
for hihg-performance outdoor sports-wear. Their proprietary
technology uses precision and controlled placement of special polymers
to make ordinary fabrics extraordinary!
The encapsulation process places an ultra-thin film around
the fabric fibers and precisely places a durable,
breathable barrier within the woven polyester fabric to
complete the high-performance process. Unlike traditional
coatings and laminations that just protect one side of the fabric,
Nextec uses up to 40 computerized process controls to place
protective polymers inside the fabric, to
shed water, and stop dust, bird droppings, tree sap and industrial
pollutants from reaching your vehicle's finish.
The result is a
fabric that provides maximum protection, but isn't bulky and
hard to store. Using Nextec encapsulation
technology we've created the ultimate car cover...and
we named it WeatherShield because no other fabric has every shielded
your car or truck from the elements like this one!
Sheds Water -
Encapsulation process assures fabric sheds water as soon as it hits the
cover.
Superior
Dry Time - Because the
fabric sheds moisture it has an absorption factor of only 2%,
compared
with up to 40% for standard woven and non-woven fabrics.
That
means, if the cover has been sitting out in the rain you only need to
shake it and the residue moisture will easily dry, in the trunk or on
the car.
Breathable
- Allows any heat or
condensation under the cover to easily escape.
UV Resistant - Special
additives prevent UV degradation and protect the vehicles finish and
interior.
Dust-proof - Patented
fiber encapsulation process prevents dust from filtering through the
fabric.
Scratch-less - Polymers
provide a silky smooth finish to the fabric and provide superior paint
protection.
Nextec fabric has been tested at 1,000 cycles on
abrasion wheels without scratching (surface must be clean and waxed).
Durable - The
encapsulation process is not affected by heat or cold and the process
won't degrade over the life of the fabric.
Easy Care - Unlike
non-woven fabrics you can clean most car-size WeatherShield covers in
your HOME washer and dryer.
OUR
MOST POPULAR ALL-WEATHER FABRIC
Technalon
covers (made with Block-It? Evolution? fabric) feature 4-layer
polypropylene construction for maximum protection in all weather
conditions. Often imitated, but never equaled, this U.S. made
fabric is used by millions of satisfied car enthusiast around the world.
|
Naturally
Moisture Resistant - Acid rain,
industrial pollutants, tree sap and bird droppings will not harm the
fabric.
|
|
Breathable - Dries
quickly because air can easily circulate through the fabric.
|
|
Dust /
Pollution Barrier - The two
middle layers of Evolution fabric act as a filtration barrier against
most airborne pollutants as small as 0.1 microns (smaller than talc).
|
|
Impact
Absorption - 4-layer
thickness absorbs impacts better than any other vehicle cover fabric to
help protect the finish from nicks, dings, dents and scratches.
|
|
Easy To Use - Since the
fabric is breathable, it doesn't trap air and "parachute" during
installation and removal. It also won't shrink or stretch and
retains its tailored shape.
|
|
Four (4) Year
Limited Warranty - Against
defects in workmanship and/or the fabric becoming unserviceable during
normal use. Covercraft will repair or replace, to the
original purchaser, after required inspection.
|
Sizes for cars,
vans, pickups, SUV's and station wagons. Material color -
tan.
Pricing starting at:185.00
300
Series / Deluxe Ready-Fit?
Covers
Providing a
protection level between the 200 and 400 series fabric, BLOCK-IT? 300
Series uses a 3-layer construction process, with an inner layer of
polypropylene melt-blown sandwiched by an inner and outer layer of
spunbond fabric. The fabric shares the technology features
found in the Technalon? BLOCK-IT 400 Series, just at a reduced
performance level and reduced cost.
|
Naturally
Moisture Resistant - Acid rain,
industrial pollutants, tree sap and bird droppings will not harm the
fabric.
|
|
Breathable - Air easily
circulates through the fabric to help it dry quickly and reduce heat
build-up under cover.
|
|
Dust /
Pollution Barrier - The middle
layer acts as a filtration barrier against most airborne pollutants.
|
|
Impact
Absorption - 3-layer
thickness absorbs impacts to help protect the finish from nicks, dings,
dents and scratches.
|
|
Easy To Use - Since the
fabric is breathable, it doesn't trap air and "parachute" during
installation and removal. It also won't shrink or stretch and
retains its tailored shape.
|
|
Three (3) Year
Limited Warranty - Against
defects in workmanship and/or the fabric becoming unserviceable during
normal use. Covercraft will repair or replace, to the
original purchaser, after required inspection.
|
Sizes for cars,
vans, pickups, SUV's and station wagons. Material color - dark
taupe. Pricing
starting at: $145.00
|
